| Type: | Rotary Encoder |
|---|---|
| Working Principle: | Absolute |
| Readout Mode: | Contact |
| Operating System: | Contact Brush Type |
| Signal Output: | Complementary Push-pull Output |
| Axle Sleeve Type: | Large Diameter Type |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Electrical Characteristics | |
| Contact Resistance | 100MΩ Max at DC5V,1mA |
| Rated voltage | DC 5V |
| Rated current | 10mA |
| Maximum Operating Current | 2 .5mA (5mA at common terminal) |
| Insulation Resistance | More than 100MΩ at DC 250V |
| Withstand Voltage | AC 300V for 1 minute |
| Mechanical characteristics | |
| Total Rotational Angle | 80°±5° |
| Rotational Torque | 50~180gf.cm |
| Stopper strength | 4.0Kgf.cm Min |
| Push-Pull Strength | 10Kgf Min for 10sec. |
| Shaft Play in Axial Direction | 0.4mm Max. |
| Durability | |
| Operating temperature range | -40ºC~+85ºC |
| Rotational Life | 30,000 Cycles Min without load |
| Cold test | -40±3ºC for 96H , CR is 200mΩ Max; IR is 100MΩ Min |
| Dry heat for long term | 85±3ºC for 96H,CR is 200mΩ Max; IR is 100MΩ Min |
| Humidity | 40±2ºC, 90-95% RH for 96H, CR is 200mΩ Max;IR is 100MΩMin. |
| Temperature cycles | -20ºC~+70ºC, 5 cycles, CR is 200mΩMax, IR is 100MΩ Min. |
| Soldering Condition | Dip soldering: 260 ±5°for 5Sec.Manual soldering: 350±10°3Sec. Max |
1, .Flux build-up prevention is taken through inserting molding around the element with resin, it's performance is more steady.
2, Long life 30,000 cycles min, Have a good feel of operation, long service life
3, Small size and good sealing, which can meet the reflow soldering
4, The product is suitable for portable radios, small stereos, and other household appliances, the related electronic equipment, primarily as adjust the volume, adjust the temperature, frequency, function switch and so on.
Q: Where Can we get the datasheets of the products?
A: Each product has the specification, Please contact with our sales if you need
Q: Can we get the samples before placing the order?
A: Yes. we can send you some free samples for your test before your order.
Q: How long is the lead time?
A: Normally we keep stock for most products, the lead time is 5~7 days as soon as the payment is released.
For customized products, it takes longer.
Q: How about the after-sale service?
A:We offer 12 months for every products we sold. If you meet any problems after sales, Pls contact us freely,we'll help solving the problems within 24 hours.
Q: What's the payment terms?
A: Normally we accept TT and Paypal. L/C is also accepted if the order quantity is large. For old customers, we'll guanartee monthly payment after good cooperationship.
Q: How about your quality control?
A: All the products will be 100% checked before the shipment.
Q: Does your company accept small order?
A: Yes, we accept small trial order.
Q: Do you support customization?
A: We support the OEM&ODM service.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}